Impresora HP LaserJet 1000 USB
Cómo configurar la impresora HP LaserJet 1000 USB en GNU/Linux
Ingredientes
- cupsys
- foo2zjs
Instalación
$ wget http://foo2zjs.rkkda.com/foo2zjs.tar.gz
$ unp foo2zjs.tar.gz
$ cd foo2zjs
$ make
$ ./getweb new1000
# ln -s /usr/share/doc/hotplug/examples/usb.usermap /etc/hotplug/usb.usermap
# make install
# make install-hoplug
# /etc/init.d/hotplug restart
Debe aparecer algo como:
/etc/hotplug/usb/hplj1000: HP LaserJet 1000 firmware loaded into /dev/usb/lp0
hplj1000: loaded successfully
Configuración
- Abre un navegador en la dirección http://localhost:631/admin.
- Pincha “Add printer”.
- Ponle un nombre (ej: my_hp) y pulsa “Continue”
- Elige hp:/usb/hp_laserjet_1000. Si no aparece elige USB Printer #1. Pulsa “Continue”
- Elige HP.
- Elige HP LaserJet 1000 Foomatic/foo2zjs
- Pincha en el nombre de la impresora.
- Pincha en “Print Test Page”
Compartir la impresora
Edita /etc/cups/cupsd.conf
y busca una sección con esta pinta:
<Location /> Order Deny, Allow Deny From All Allow Frow 127.0.0.1 </Location>
Añade otras líneas “Allow” que permitan acceder a los clientes o a toda un red, por ejemplo:
<Location /> Order Deny, Allow Deny From All Allow Frow 127.0.0.1 Allow Frow 140.20.10.1 Allow Frow 192.168.0.* </Location>
Reinicia cups:
# /etc/init.d/cups restart
Configuración del cliente
Con la interfaz web de CUPS añade una impresora con la siguiente configuración.
- Protocolo: Internet Printing Protocol (http)
- URI: http://servidor:631/printers/my_hp
- Fabricante: Raw
- Modelo: Raw Queue
Enlaces
[ show comments ]
blog comments powered by Disqus